10 Best Front Bumper Parking Sensors for Tesla Model Y in 2026

Finding the right front bumper parking sensors for Tesla Model Y can be confusing because many listings look similar but differ in connector type, position, and calibration needs.

This roundup focuses on practical compatibility, installation fit, and sensor performance so you can choose a replacement that works with less guesswork.

Best 10 Front Bumper Parking Sensors for Tesla Model Y Picks for 2026

OEM-Style Replacement Sensor – Front/Rear Bumper Park Sensor for Model 3/Y

If you need front bumper parking sensors for Tesla Model Y, this Dreyfond replacement is aimed at drivers who want an OE-style direct fit for 2017-23 Model 3 and Model Y. It cross-references OEM numbers 1127502-11-D, 1127502-11, and 1127502-00, and the listing stresses direct replacement with no special modification.

Best For: Tesla owners replacing a front or rear bumper parking sensor with an OEM-matched part.

Pros:

• Fits 2017-23 Tesla Model 3 and Model Y applications listed by the seller
• Matches multiple OE numbers for easier parts identification
• Built with high-grade materials and tested before leaving the factory
• Advertised as easy to install as a direct replacement

Cons:

• Buyer must confirm the car model and OE number before ordering
• Listing does not specify a multi-sensor kit; it is a single replacement sensor

Overall, this is a straightforward pick if you are chasing the correct OE-style sensor match for a Tesla bumper parking repair. The main strength is compatibility focus, but careful part-number verification is essential.

4-Sensor Value Kit – Tesla Parking Sensors for Model Y/X/S/3

For shoppers comparing front bumper parking sensors for Tesla Model Y, this 4-piece kit stands out as a complete replacement set rather than a single sensor. The listing says it is designed for Tesla Model Y, Model S, Model X, and Model 3, with OE number 112750301D and plug-and-play installation.

Best For: Owners who want a full 4-sensor parking assist replacement kit with OE-style compatibility.

Pros:

• Includes four sensors for a complete parking-assist solution
• Claims compatibility with Tesla Model Y, Model X, Model S, and Model 3 ranges listed by the seller
• OE-style fit and shape with plug-and-play installation
• ABS+PC construction with IP67 waterproofing and wide temperature testing

Cons:

• Professional installation is recommended by the seller
• Compatibility dates vary by model, so buyers should verify their exact vehicle year

This kit makes the most sense when you want to replace multiple sensors at once and prefer a matched set. Its appeal is convenience and complete coverage, but confirming the listed year fitment before purchase is still important.

Front/Rear Side Sensor – White Parking Sensor for Model 3/Y

If your repair calls for a Tesla Model Y front bumper parking sensor in a white side-sensor style, this part is aimed at the 2017-2019 Model 3 fitment the seller lists. It is identified by OE numbers 1127503-12-C, 1127503-12-B, and 1127503-01-D, and the listing positions it as a cost-effective, OEM-quality repair part.

Best For: Drivers needing a white parking side sensor for the listed Tesla Model 3 fitment.

Pros:

• Cross-references several OE part numbers
• Marketed as a cost-effective OEM-quality replacement
• Made from high-quality materials for durability
• Includes a 1-year warranty from the seller

Cons:

• Seller compatibility note is limited to 2017-2019 Tesla Model 3
• It is a side sensor, not a generic universal bumper sensor

This is a sensible option if you are matching a specific white side sensor and want a warranty-backed replacement. Just be sure the fitment and position match your vehicle before ordering.

Outer Corner Sensor Pair – Front Outer Parking Sensor for Model 3

For front bumper parking sensors for Tesla Model Y-style ultrasonic repairs, this FIWARY part is actually targeted at the outer corner position on Tesla Model 3 models from 2017-2021. The listing makes it clear that it replaces OE 1127502-01-D / 1127502, but only for the bumper outer end or corner position, and it requires calibration after installation.

Best For: Tesla Model 3 owners replacing the outer corner bumper sensor with calibration in mind.

Pros:

• Exact OE-number cross reference for 1127502-01-D / 1127502
• Outer corner-specific design helps avoid position mismatch
• IP67 waterproof, shock-resistant, and temperature-resistant housing
• Comes as a 2-piece set for paired replacement needs

Cons:

• Not for the inner middle sensor position
• Calibration with Tesla Toolbox or a diagnostic tool is mandatory
• Compatibility is stated for Model 3, not Model Y

This option is best treated as a precision replacement rather than a general-purpose sensor. Its value is in the exact outer-corner fit, but the calibration requirement means it is not a plug-and-finish job.

OEM-Style Replacement – Front Rear PDC Sensor for Tesla S/X/3/Y

If you need front bumper parking sensors for Tesla Model Y, this X AUTOHAUX unit is a direct replacement option aimed at Tesla owners who want to restore parking assist warnings without changing the system design. It is listed for Model Y 2020–2021 and uses compatible connectors for straightforward installation.

Best For: Tesla Model Y owners looking for a simple replacement sensor with broad Tesla fitment.

Pros:

• Listed fitment includes Tesla Model Y 2020–2021
• Direct replacement design with matching connectors
• Intended to warn drivers as the car approaches an obstacle
• Supports multiple Tesla OE part numbers

Cons:

• Fitment is limited to the listed model years
• Buyer needs to verify the part number before ordering
• Installation requires shutting off the car first

This is a practical pick if you want an OEM-style parking sensor replacement and already know the part number match for your Tesla. The main advantage is simplicity: it is designed as a compatible, direct-fit sensor rather than an upgrade or custom solution.

Multi-Model Value Pack – 4Pcs Parking Side Sensor for Model Y

For shoppers comparing front bumper parking sensors for Tesla Model Y, this 4-pack is a value-focused replacement option that covers Model Y 2020–2025 along with other Tesla models. The listing emphasizes upgraded material quality and a simple install process for replacing a worn or failed PDC sensor.

Best For: Tesla Model Y drivers who want a multi-sensor replacement pack with long fitment coverage.

Pros:

• Fits Tesla Model Y 2020–2025
• Sold as a 4-piece pack for broader replacement needs
• Made from high quality material and tested after transport
• Comes with a 12-month warranty and return/repair support

Cons:

• Installation instructions are specific about clip placement
• Fitment spans multiple Tesla models, so confirmation is still important
• Listing is focused on replacement value rather than upgraded features

This is a sensible option if you want to stock up on replacement sensors or handle more than one worn unit at once. The biggest appeal is coverage and warranty support, especially if you are replacing sensors on a Tesla Model Y and want a budget-conscious pack.

Harness-Ready Replacement – Front and Rear Parking Sensor with Harness

If you are shopping for front bumper parking sensors for Tesla Model Y and want a plug-and-play replacement, this MEILICACY sensor includes an OEM-compatible wiring harness for easier integration. It is listed for Tesla Model Y 2020–2021 and is designed to provide audible alerts that increase as you get closer to an object.

Best For: Tesla Model Y owners who want a sensor with a wiring harness for simpler installation.

Pros:

• Compatible with Tesla Model Y front and rear 2020–2021
• Includes an OEM-compatible wiring harness
• Designed for audible parking alerts that intensify near obstacles
• Built to resist rain, snow, and extreme temperatures

Cons:

• Fitment is limited to the listed Tesla years
• Compatibility should still be checked against the supplied part number
• Listing references multiple Tesla models, which may require careful verification

For a Model Y replacement, this option stands out because the harness is part of the package and the listing stresses direct factory-style installation. That makes it a practical choice if you want a sensor designed for easier hookup and weather-resistant use.

Direct Replacement Set – 4Pcs Parking Side Sensor

If you need front bumper parking sensors for Tesla Model Y and want a straightforward replacement option, this 4-piece set is built around part number 1127503-01-D and is listed for Model Y along with Model 3, S, and X from 2016-2021. It’s a practical choice when you’re replacing multiple sensors and want the part number match to do the work.

Best For: Tesla owners replacing multiple front or rear bumper sensors by matching OEM part number 1127503-01-D.

Pros:

• 4-piece included set for replacing more than one sensor at once
• Matches part number 1127503-01-D for easier fit verification
• Listed for Model Y plus Model 3, S, and X 2016-2021
• Includes a 1-year warranty description

Cons:

• Buyer is advised to verify the part number and photos before purchase
• Fitment range is broad, so checking compatibility is important
• No detailed installation guidance is provided in the notes

This is a sensible pick if you want a basic replacement set and can confirm the exact sensor match first. The main value here is the included 4-pack and the clearly stated part number reference.

Versatile 3-Pin Option – 1127503-12-C Parking Sensor

For shoppers comparing front bumper parking sensors for Tesla Model Y, this 3-pin replacement is the most explicitly detailed on compatibility and part-number cross references. It’s listed for Model Y 2020-2025, with support notes covering several related Tesla part numbers, making it a strong candidate when you need a broadly referenced replacement sensor.

Best For: Owners who want a Tesla-compatible 3-pin replacement with extensive part-number cross references.

Pros:

• Compatible with Model Y 2020-2025 according to the notes
• 3-pin design with 12V specification
• Lists multiple cross-reference part numbers for easier matching
• Notes include a VIN/chassis check option if fitment is uncertain

Cons:

• Buyer must check body color note before ordering
• Warranty is only listed as 6 months
• Fitment spans several Tesla models, so verification is still necessary

Overall, this is the most flexible fitment-focused option in the group, especially if you’re working from an OEM number or VIN. The detailed compatibility notes make it useful for cautious buyers who want to avoid ordering the wrong sensor.

Longer Warranty Pick – Front and Rear PDC Sensor

If you’re shopping for front bumper parking sensors for Tesla Model Y and want a replacement with a longer warranty description, this PDC sensor stands out. It’s listed for Model Y front and rear 2020-2021, with direct replacement language and a wide sensing range stated in the notes.

Best For: Buyers who want a direct-replacement Tesla parking sensor with a 24-month warranty description.

Pros:

• Listed for Model Y front and rear 2020-2021
• 24-month warranty description is longer than the others here
• Direct replacement design is called out in the notes
• Weather-resistant construction is specifically mentioned

Cons:

• Fitment still requires checking the compatibility list
• Notes reference a compatibility picture for confirmation
• Only one sensor is included

This option is appealing if warranty length matters and you only need a single sensor replacement. Its direct-replacement positioning and weather-resistant description make it a practical choice for normal repair work.

How We Picked the Best Front Bumper Parking Sensors for Tesla Model Y

We prioritized listings that match Tesla Model Y front bumper use cases, with attention to OEM-style part numbers, vehicle compatibility, plug-and-play claims, and whether a sensor is meant for the front outer corners or the full bumper setup. We also looked for clear fitment ranges, connector details, and notes on calibration, since those factors matter more than generic sensitivity claims.

Quick Comparison

For Front Bumper Parking Sensors for Tesla Model Y, the biggest differences are position, connector style, and whether the part is sold as a single sensor or a multi-piece set. Some options are direct replacements for front outer sensors, while others are broader front/rear or side-sensor kits that may fit the Model Y but are designed for more than one location. Always compare the OE number against your original sensor before ordering.

Key Buying Factors for Front Bumper Parking Sensors for Tesla Model Y

Fitment and OE Number Match

The safest choice is a sensor that matches your original part number exactly. Tesla front bumper sensor listings often include several OE references, and small suffix changes can indicate different revisions. If your vehicle needs a specific front corner sensor, make sure the listing calls out that position rather than a generic bumper sensor.

Calibration and Installation

Some replacements may require calibration after installation, especially front outer sensors. If you want a simpler swap, look for plug-and-play options that explicitly mention no coding or minimal setup. Even then, confirm connector count, housing shape, and mounting tabs before purchase.

Front Vs. Front/Rear Compatibility

Many Tesla-compatible sensors are marketed for front and rear use across Model 3, Model Y, Model S, and Model X. That broader compatibility can be useful, but only if the sensor position and connector layout match your specific front bumper application. A part that works on several Tesla models is not automatically the best fit for your Model Y front bumper.

Build Quality and Signal Consistency

Look for listings that emphasize stable detection, OEM-style construction, and consistent sensitivity. In parking assistance, the quality of the signal matters more than marketing language. If your goal is reliable curb and obstacle detection, prioritize exact-match replacements over universal-style alternatives.

Who Should Buy Which Front Bumper Parking Sensors for Tesla Model Y?

If you need the most straightforward repair, choose the exact OE-matched front sensor for your Model Y’s bumper position. If you are replacing multiple sensors at once, a multi-piece kit can offer better value, but only if each sensor is confirmed for the same application. Buyers who want the least hassle should favor clearly labeled plug-and-play listings with specific Tesla Model Y fitment and connector details.

For anyone unsure between similar options, start with the original part number on the old sensor and match that first. That one step usually saves the most time and avoids incompatible returns.